Hellow guys, Welcome to my website, and you are watching LED Retrofit Kit - (2) 28W LED Lamps, (1) DALI Dimmable PS - 120-277V. and this vIdeo is uploaded by Larson Electronics Product Testing at 2022-07-19T07:00:24-07:00. We are pramote this video only for entertainment and educational perpose only. So, I hop you like our website.
| Name | LED Retrofit Kit - (2) 28W LED Lamps, (1) DALI Dimmable PS - 120-277V |
| Video Uploader | Video From Larson Electronics Product Testing |
| Upload Date | This Video Uploaded At 19-07-2022 14:00:24 |
| Video Discription | LED Retrofit Kit - (2) 28W LED Lamps, (1) DALI Dimmable PS - 120-277V https://www.larsonelectronics.com/product/266837/led-retrofit-kit-2-28w-led-lamps-1-dali-dimmable-ps-120-277v The Larson Electronics LEDT8-28W-KT-ADC-2X LED Retrofit Kit is an excellent choice for upgrading existing T8 fluorescent lamp fixtures to LEDs as well as a direct replacement for our own LED light fixtures. The LED lamps provide 125 lumens per watt for a total of 3,500 lumens per lamp. These T8 LED replacement lamps offer 50,000-hour lamp life, over twice that of T8 or T5HO fluorescent lamps, while offering impact and vibration resistance far exceeding traditional light sources. The LEDT8-28W-KT-ADC-2X is an energy efficient LED retrofit kit for buildings transitioning to LED lights. This kit contains two 28-watt LED lamps and one DALI capable dimmable power supply. During installation, the existing ballast must be removed from the unit and the tombstone must be rewired. The 28-watt T-series LED bulb works with any T8 fluorescent light fixtures, can be configured for any T-series fluorescent lamp fixture with G13 bi-pin tombstones or sockets, and requires no ballast for operation. To increase safety during installation and routine maintenance, these lamps are wired for single sided power with internal integrated LED driver housed within the tube. Internally, you simply bring the black wire to one pin and the white wire to the other. The polycarbonate lens diffuses the light and makes this bulb ideal for food safe environments as there is no glass. The aluminum housing serves as a heat sink and provides rigidity and strength for this LED bulb. In fluorescent light fixtures with electronic ballasts, the operator needs to bypass the ballast and wire the power directly to one end of the LED tube (black wire to one pin and white wire to the other). Thus, this is an ideal upgrade for 4 foot fixtures with failed ballasts. These LED fluorescent style bulbs are universal voltage and run directly off any voltage ranging from 120 volts to 277 volts AC 50/60 Hz. The internal LED driver is a "smart" driver, sensing the incoming voltage and adjusting accordingly to provide the current required by the lamp. This allows operators to simply wire the fixture to voltage within the 120-277V range, no modifications required. This includes commonly found voltages such as 120V 60Hz, 220V 50Hz, 240V 60Hz, and 277V 60Hz. We also offer a 12/24V AC/DC version for low voltage applications for AC or DC power. Low voltage fixtures require no modifications between 12V and 24V power sources, nor between alternating and direct current supply. The LEDT8-28W-KT-ADC-2X features specially designed rotating end caps. Fluorescent lamps provide a full 360° beam coverage around the lamp. Since most fluorescent fixtures require directional lighting, reflectors have to be used to bounce the light back towards the intended target area for illumination. LED lamps are directional, which eliminates the need for back mounted reflectors and reduces wasted and lost light. However, the tombstones for existing fixtures may position the face of the LED lamp in a direction facing away from the target illumination area. With the rotating pins, operators can reposition the lamp so the face of the LED tube is positioned properly within existing fixtures. This also allows for fine tune adjustment of each individual lamp within fixtures containing multiple lamps. These LED fluorescent tube replacements can be used as upgrades or replacements to our own explosion proof fluorescent lights, explosion proof paint spray booth lights as well as any other T series light fixture the operator already has in house. We have specially designed these for our explosion proof light fixtures, however, they can be used as replacements in standard fluorescent light fixtures. In our facilities, we replaced worn or spent fluorescent bulbs with these LED bulbs by removing the ballasts and bringing the white wire to one end and the black wire to the other end of the LED tube. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 1-800-240-2508 or message sales@larsonelectronics.com for more information about our custom options tailored to meet your specific industry needs. |
| Category | Science & Technology |
| Tags | larsonlights | qc video | explosion proof | hazardous location | hazardous area | buck boost transformer | isolation transformer | uvc | uvclight | far-uv | industrial | electronics | lighting | LED | Halogen | LarsonElectronics | voltage | electrical | power | powerdistribution | Retrofit | Kit | 28W | Lamps | DALI | Dimmable PS | 120-277V |
